Sundance Spas 230/240 Volt Laing Circulation Pump 3/4" Barb, 6000-125 (SM-909-NHW-18)Sundance Spas$327.00
Loading...
Loading...
Loading...
Loading...
Sundance Spas
Note: We ship the latest version available. Pump has a flat-metal mounting base. Simply remove the plate screws to rotate circ pump to direction needed.
The Laing E10 EcoCircPump is used on many spa/hot tubs and can be used to replace most brands of circulation pumps with 3/4 inch barbed fittings.
This pump uses 40% less energy and runs 40% cooler than previous models. It also includes a smart "chip" in the motor that gradually increases rpm at power up that minimizes impeller cavitation and ensures "air lock" free startups. This cycle will repeat up to 10 times until "prime" is established. If prime is not established, the pump will shut down and require manual restart (turn power to spa off and back on).
Please note: The pump will not operate without water on the head of the pump, do not try and bench test this pump without it being in the spa so the pump is water primed.
This pump replaces old part numbers used by Sundance, Jacuzzi and other Manufacturers: 6000-125, 6500-035, SM-909-NHW-18 3/4, SM-909-NH-18, E10-NSHNDNN2W-01 (see below for more complete list). No longer comes with the metal base that was used on Sundance, Jacuzzi Spas.
The pumps are water tested at the Factory so when you receive it it may have a little water left in the wet end of the pump.
This Pump is used on the following Sundance® Spas:
The Pump is used on the following Jacuzzi® Spas:
PLEASE NOTE: This pump is a 230/240 Volt Pump, the wires that come with the pump is white, black and green, the white and black are the 2 hot leads with the green as a Ground. The pump comes with no connectors. Do not confuse this pump for a 120 Volt version!
*We ship select parts for your Sundance Spa with FREE GROUND SHIPPING with a $4.95 handling fee on all orders. (Contiguous U.S. only). Please see our Shipping Policy: http://www.spaandpoolsource.com/shipping-policy.aspx
Additional Information
No reviews have been added for this product.
Sundance Spas
Note: We ship the latest version available. Pump has a flat-metal mounting base. Simply remove the plate screws to rotate circ pump to direction needed.
The Laing E10 EcoCircPump is used on many spa/hot tubs and can be used to replace most brands of circulation pumps with 3/4 inch barbed fittings.
This pump uses 40% less energy and runs 40% cooler than previous models. It also includes a smart "chip" in the motor that gradually increases rpm at power up that minimizes impeller cavitation and ensures "air lock" free startups. This cycle will repeat up to 10 times until "prime" is established. If prime is not established, the pump will shut down and require manual restart (turn power to spa off and back on).
Please note: The pump will not operate without water on the head of the pump, do not try and bench test this pump without it being in the spa so the pump is water primed.
This pump replaces old part numbers used by Sundance, Jacuzzi and other Manufacturers: 6000-125, 6500-035, SM-909-NHW-18 3/4, SM-909-NH-18, E10-NSHNDNN2W-01 (see below for more complete list). No longer comes with the metal base that was used on Sundance, Jacuzzi Spas.
The pumps are water tested at the Factory so when you receive it it may have a little water left in the wet end of the pump.
This Pump is used on the following Sundance® Spas:
The Pump is used on the following Jacuzzi® Spas:
PLEASE NOTE: This pump is a 230/240 Volt Pump, the wires that come with the pump is white, black and green, the white and black are the 2 hot leads with the green as a Ground. The pump comes with no connectors. Do not confuse this pump for a 120 Volt version!
*We ship select parts for your Sundance Spa with FREE GROUND SHIPPING with a $4.95 handling fee on all orders. (Contiguous U.S. only). Please see our Shipping Policy: http://www.spaandpoolsource.com/shipping-policy.aspx
Additional Information